Wave Bike Racks: wave bike rack parking

显示标签为“wave bike rack parking”的博文。显示所有博文

2017年1月5日星期四

Choose the Best Bike Rack for Your Car

Although now it is age of modern cars and motor bikes, yet no one ignore the fact that they love cycling. Not only because it is fun to do cycling, but because it helps have you commuted short distance easily. You do not have to spend anything for its fuel. Your energy will be enough for using a bicycle for going to one place to another. Apart from that there is no need to mention that while you use a bicycle you are doing a lot of exercising.

The question that arises is if you are travelling to a mountain vacation or beach holiday and you want to carry your bicycle along with you can you do that?

Even if you are not a pro cyclist you must be aware of the fact that you can do that easily. With the help of bike racks installed at your vehicle with which you will be commuting to the distance place you will be able to carry your bike along with you. So, what are the different types of bike racks that will help you carry your bike along with you while you travel?

Roof top bike racks

If you are planning to travel with your family and there is not space available at the base of your car, then you can always opt out for a roof top bike rack. If there is a car rack install at the roof of your car then installing the roof top bike rack will be quite easy. If you do not have one then you can ask for help from the dealer who is selling you the bike rack.

Hitch bike racks

Another common type of bike rack is one that is installed at the car are hitch bike racks that will let you carry your bikes at the back of your car. Sometimes with a hitch bike rack you may face problem in opening and closing the back door. However, it is most convenient in other ways that your bike is not open to the damages that may happen if you use a roof top bike rack.

There are other types of bike racks too and you can look for them online. There you will be able to choose one that is quite useful for your purpose and comparing the cost of the bikes will also be easy.

http://www.chinabikerack.com

2016年11月29日星期二

DC'S BIKE LANES ARE IMPROVING YOUR COMMUTE, YOUR HEALTH, AND YOUR SOCIAL LIFE

http://www.chinabikerack.com/products/Wave-Bike-Racks.htm

DC'S BIKE LANES ARE IMPROVING YOUR COMMUTE, YOUR HEALTH, AND YOUR SOCIAL LIFE

It’s not easy to get around Washington, DC. It’s really, really not!

There’s ample evidence of this. Tune into WTOP for the regular traffic report -- “traffic on the eights, and when it breaks” -- and listen to the anchor with a thick mid-Atlantic accent recite a real-time litany of congested area highways.

If you need more convincing, I present to you Exhibit B: An entire podcast, produced by WAMU, solely devoted to the chaotic commuting nightmare that is the Washington Metro system. It’s aptly named “Metropocalypse,” and it’s harrowing.

Or just compare it to other cities. Last year, the Urban Mobility Institute named the city the nation’s most congested.

So what should you do to get around the gridlock?

A bike. Just get on a bike.

“If you’re moving here and I know you, I’d definitely tell you to bring your bike,” says Natalia Rodriguez-Santos, who lives in Shaw and calls her bike her primary means of transportation. “It’s the easiest way to get around.”

It appears many Washingtonians agree with this sentiment. The number of residents who get around by bicycle has gradually inched up over the years, while the annual number of bicycle trips we’re taking around here has skyrocketed since 2000. Today, 4% of DC commuters do so by bike. Sounds like a little, but by headcount, that’s a lot.

And that growing constituency is among the reasons the city government has built out its bike infrastructure.

In fact, we’re in the midst of an expansion of the existing network right now.

In 2000, there were less than three miles of bike lanes in the District. Today, DC maintains 69 miles of them. And more are coming.

“Fifty-five to 59 percent of DC residents get around the city not in a car, which is pretty high, and the city has a goal to get that to 75 percent,” says Greg Billing, executive director of the Washington Area Bicyclist Association (WABA).

Billing is referring to the city’s MoveDC program, which aims to get more of us out of our cars and onto buses, sidewalks, and bikes -- and by doing so, easing the gridlock. There are plans for pedestrians, and you can find them here. But the designs for the biking community are substantial.

The city’s master plan calls for a total 136 miles of bike lanes by sometime around 2040. We’ll all be old and grey by then, but still, it’s all about the kids.

“There’s a vision for a fully comprehensive network that connects neighborhoods to each other and neighborhoods to downtown,” says Billing. He calls the MoveDC goals ambitious -- and says the city’s a bit behind schedule -- but ultimately worth it for easing congestion. Bike lanes, after all, attract bikers. The cycle tracks that have popped up on 15th, M, and L streets in Northwest prove, “If you build it, people will ride.”

WAVE BIKE RACK

http://www.chinabikerack.com/products/Wave-Bike-Racks.htm

2016年11月28日星期一

Gadget turns bicycle transit upside-down

If you own more than one type of bicycle, then you may have noticed that a single car-top-mounting system doesn't necessarily work for all of them – or at least, not without a bit of doing. Going between a road bike, mountain bike and fatbike, for instance, can require the use of adapters for different tire widths, axle types or frame designs. Then, there's also the fact that not all systems are compatible with all roof-top racks. That's why Australian cyclists Stefan Wrobel and Sean Stoney invented the Upside Rack.

The Upside can reportedly be attached to almost any type of bike, allowing it to be mounted upside-down on any rack. Here's how it works …

With their bike right-side-up and on the ground, users start by hooking a rubber strap on the rear end of the Upside Rack around the saddle. They then fold the Y-shaped device's anodized aluminum arms forward and clamp them to the handlebars. When the bike and rack are turned upside-down and placed on a roof rack, the tops of the handlebar clamps hook onto the front cross-rail. A hook in the back, meanwhile, is slid forward until it engages the rear rail, and is then tightened down and locked into place.

The whole process is said to take about 20 seconds, and is demonstrated in the video at the bottom of the page.

Users can mount the device on the car's rack facing forwards or backwards, so two or more Upside-equipped bikes can be placed on one vehicle sitting in alternating directions. Additionally, Wrobel tells us that the product has passed a series of crash tests, meaning that it won't go flying off if the car is in a collision.

WAVE BIKE RACK

2016年11月9日星期三

Invert U parking two bike bike stand

Product Description

1. Material : Stainless steel 316, stainless steel 304 . steel

2. Size: 850*700mm

3. Place of origin: Suzhou China

4. Certification: ISO9001, SGS, TUV

Product Name	bike racks
Material	Steel Q 235
Color	Slivery
Finished	Powder coated /galvanized
Fixing	Over ground
Other option	OEM and ODM
Packing size	860760210mm
Delivery time	Against the deposit in 30 days

Products Show

Our Company

Factory

Our Factory

Workshop

Our Workshop

Showroom

Our Showroom

Team

Our Team

Packing & Delivery

Packing Details : With bubble

Delivery Details : Against the deposit with in 30days

1. Special logistics packaging

2. Suitable carton size

3. Shock bubble

4. Professional placement

5. Deliery in the contaienr

6. Delivery to Cusomter

Our Certifications

Customer bike racks

With high quality and competitive price we also against many certificate as ISO9001-2008, SGS, TUV

Customer Photo

Favorable Comment

One customer from America comes to our factory two times . What he want to do is just for buying doublke bike racks . He said it is amazing i like it and after contact in the view he comes our factory and see the samples .He said it will be wonderful trip in his life and also with high quality bike racks He hopes all the bikes can safe with racks

Favorable Comment

Another cusomer from Africa.When people talks about Indian must be think of liar .Actually it is not correct .We should respect all the people no matter where they come from because we are equal .We all have rights to enjoy everything, This customer teach us we should trust there is also trust between us .Then we can make more profits

Favorable Comment

Josh one cusomter very cute from UK . Sometimes he likes a little boy .Actually we have done business almost 4 years he support me too much . He trusted me and always teached me how to do can save space and how to do can save time to find right person. Their workmates also very nice it is really very happy to work with them and i do think our bike racks will be more popular in the near futrure.

FAQ

Q: How long will it take to get my order?

A: All our products are made to order – with a few exceptions – and our typical lead time is 6-8weeks. For custom products or new designs, this production time begins from the date of design sign off from your team. Below is an overview of our typical process here at PIONEER

Q: What finishes are available?

A: Stainless steel is great for public outdoor area's. Hot dipped galvanized is very durable. We can powder coat a range of colors

Q: How long can be use the bike racks

A: Normally for galvanized bike racks can be use at least 10 years and powder coated racks can be use at least 3 years

Q: I can't seem to find what products I'm looking for, how can you help?

A: At PIONEER we can help you with the following (and more):

Adapting client specified designs

Customising existing PIONEER products

Creating brand new products based on your ideas

Our team of product design engineers will work with you on perfecting the design.

Can’t see the answer to your question here? Get in contact with our team here for any questions, queries or comments!:

Contact person

Name: Kitty Song

PH:0086-18761974154

Wechat:0086-18761974154

QQ:2313475071

Facebook:https://www.facebook.com/songpeikitty

Skype: kittysongpei

Stainless steel pipe bending U bicycle rack

Product Description

1. Material : Stainless steel 316, stainless steel 304 . steel

2. Size: 850*700mm

3. Place of origin: Suzhou China

4. Certification: ISO9001, SGS, TUV

Product Name	Stinless steel bike racks
Material	stainless steel
Color	Slivery
Finished	Brush polish
Fixing	Over ground
Other option	OEM and ODM
Packing size	860760210mm
Delivery time	Against the deposit in 30 days